2021 Audi RS3 LMS Racecar

2021 Audi RS3 LMS Racecar

The second generation of the Audi RS3 LMS presents itself with new developments in all areas that serve two goals: To make the near-production entry-level model an even better race car and to optimize customer benefits in all areas. Despite this, the model remains inexpensive to buy and maintain, offers an even higher level of safety and, with up to 250 kW (340 hp), provides ample driving pleasure.

2021 Audi RS3 LMS Racecar

New engine generation


In the new Audi RS3 LMS, the fourth generation of the two-liter four-cylinder engine called EA888 replaces the predecessor series. The engine block and cylinder head, crank drive, valve train, intake manifold, fuel injection and the new turbocharger remain absolutely standard in the race car. Only the valve cover breather with its oil separator differs from the standard component, as does the exhaust system. The adoption of the engine from volume production has proved highly successful in TCR racing. In many cases, Audi's power units already achieved tens of thousands of racing kilometers in the previous vehicle generation in the hands of the customers. The standard engine management system from Magneti Marelli specified by the regulations is new. It required a great deal of development work. The maps are programmed for specific manufacturers and stored with the promoters of the racing series. Together with the standardized hardware, this guarantees transparency and equal opportunities for all manufacturers. Audi has optimized the cooling of the unit in the areas of coolant and charge air. The two water coolers, which are arranged horizontally one above the other, are now separate units mounted in silent blocks and therefore much less sensitive to vertical impacts, such as those that can occur when riding off the track on rough uneven ground.

2021 Audi RS3 LMS Racecar

Optimized power transmission


Audi Sport customer racing has renewed the power transmission for the second generation of its TCR race car in all areas. The twin-plate racing clutch now weighs 800 grams less than in the previous model and thus reduces rotational masses as well as inertia. Hewland's new pneumatically actuated six-speed transmission is particularly robust and can be operated sequentially via paddle shifters on the steering wheel. Mechanics can adjust the locking effect of the newly developed multi-disc locking differential with its twelve friction surfaces easily and quickly from the outside. For their part, stronger drive shafts contribute to higher mileage and an improved cost balance.

Improved ergonomics in the new cockpit


The cockpit is even more driver-oriented and easier to operate. The steering wheel features a control panel specified for TCR purposes. In the center console, twelve functions are ergonomically optimized and logically grouped in a clearly arranged keypad. The ignition and various light functions can be activated there, as can the cockpit fan or the optional windshield heating. The brake balance and, if necessary, the fire extinguishing function are also within easy reach below the center console and are easy to identify. The new wiring system developed for motorsport with six decentralized fuse boxes reduces weight and cable complexity and offers targeted redundancies. This means that any electrical malfunctions in individual subsystems have less impact on the entire network. The pedal box can be adjusted mechanically after loosening a screw connection and thus adapted to different driver sizes within a few minutes.

2021 Audi RS3 LMS Racecar

Benchmarks in safety


No other TCR touring car offers as many optional safety components as are on board as standard in the Audi RS3 LMS. The roll cage consists of steel tubes that add up to just under 25.8 meters in length. A six-point safety belt serves as restraint system for the driver. The Audi Sport Protection Seat, unique in the TCR class, with its robust construction and elaborate upholstery offers maximum accident safety. For better occupant protection in the event of a side impact, it is moved closer toward the center of the vehicle. Optionally available seat-wrapping safety nets on the right and left provide additional protection for the driver. The standard roof hatch facilitates recovery of the driver after accidents. It allows the helmet to be gently removed upward and, if necessary, a rescue corset ("Kendrick Extrication Device") to be inserted vertically from above to stabilize the driver's spine. For the first time, the rear window in every Audi RS3 LMS is made of polycarbonate ex factory at no extra charge. This material reduces weight and is extremely impact-resistant. Foreign objects can only penetrate this window with difficulty in the event of an accident, for example. The safety fuel tank complies with FIA FT3 regulations and has a capacity of 100 liters. A fire extinguishing system completes the safety equipment.

2021 Audi RS3 LMS Racecar

Adaptable chassis and consistent brakes


Audi Sport customer racing is breaking new ground in chassis adjustment. The McPherson design on the front axle makes it possible to implement changes to the kinematics faster than ever before. Whereas the previous bolting system always required a chassis measurement for changes, spacer components known as shims can now be inserted in the control arm and track rod in a matter of minutes. In four different widths from 1.2 to 10 millimeters at the wishbone, they can be combined in such a way that camber changes from 2 to 7 degrees at the front axle can be variably adjusted. Without wheel alignment, the respective session can be continued on the race weekend - an unbeatable advantage, for example, when changing the set-up at short notice during qualifying. The Audi RS3 LMS also features track rods as standard on the four-link rear axle to achieve bump steer effects. They support the agility of the race car when turning in. Other variables of the suspension kinematics such as anti-dive and anti-lift, the height of roll centers, caster or the distance of the subframes to the body when the ride height is changed offer all the options a team could wish for when setting up. For the first time, the stabilizers have a quick-release fastener and can therefore be replaced at short notice. This gives the engineers even more freedom: In total, there are nine stabilizer settings on the front axle and six on the rear axle. Different springs and dampers that can be adjusted in two ways complete the chassis setup options. The brakes, whose dimensions are limited by the regulations, operate in a more favorable thermal window in the new model. In addition to the discs, the ventilation also includes the highly stressed six-piston calipers on the front axle for the first time. With all these innovations, the Audi RS3 LMS offers more race car feeling than ever before.

Post a Comment

0 Comments